NHD-0216HZ-FSW-FBW-3V3C
Newhaven Display
defective insulation of terminals.
4. The modules should be kept in anti-static bags or other containers resistant to static for storage.
5. Only properly grounded soldering irons should be used.
6. If an electric screwdriver is used, it should be grounded and shielded to prevent sparks.
7. The normal static prevention measures should be observed for work clothes and working
benches.
8. Since dry air is inductive to static, a relative humidity of 50-60% is recommended.
Soldering Precautions:
1. Soldering should be performed only on the I/O terminals.
2. Use soldering irons with proper grounding and no leakage.
3. Soldering temperature: 280C+10C
4. Soldering time: 3 to 4 second.
5. Use eutectic solder with resin flux filling.
6. If flux is used, the LCD surface should be protected to avoid spattering flux.
7. Flux residue should be removed.
Operation Precautions:
1. The viewing angle can be adjusted by varying the LCD driving voltage Vo.
2. Since applied DC voltage causes electro-chemical reactions, which deteriorate the
display, the applied pulse waveform should be a symmetric waveform such that no DC
component remains. Be sure to use the specified operating voltage.
3. Driving voltage should be kept within specified range; excess voltage will shorten display
life.
4. Response time increases with decrease in temperature.
5. Display color may be affected at temperatures above its operational range.
6. Keep the temperature within the specified range usage and storage. Excessive temperature
and humidity could cause polarization degrad
ation, polarizer peel-off or generate
bubbles.
7. For long-term storage over 40C is required, the relative humidity should be kept below
60%,and avoid direct sunlight.
Limited Warranty
Newhaven Display LCDs and modules are not consumer products, but may be incorporated by Newhaven
Display's customers into consumer products or components thereof, Newhaven Display does not warrant that
its LCDs and components are fit for any such particular purpose.
1. The liability of Newhaven Display is limited to repair or replacement on the terms set forth
below. Newhaven Display will not be responsible for any subsequent or consequential events or injury
or damage to any personnel or user including third
party personnel and/or user. Unless otherwise
agreed in writing between Newhaven Display and the customer,Newhaven Display will only replace or
repair any of its LCD which is found defective electrically or visually when inspected in accordance
with Newhaven Display general LCD inspection standard . (Copies available on request)
2. No warranty can be granted if any of the precautions state in handling liquid crystal display above
has been disregarded. Broken glass, scratches on polarizer mechanical damages as well as defects that
are caused accelerated environment tests are excluded from warranty.
3. In returning the LCD/LCM, they must be properly packaged; there should be detailed description of
the failures or defect.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
NHD-0216K1Z-FL-GBW
LCD MOD CHAR 2X16 Y/G TRANSFL
NHD-0216K1Z-FL-YBW
LCD MOD CHAR 2X16 Y/G TRANSFL
NHD-0216K1Z-FSA-FBW-L
LCD MOD CHAR 2X16 AMB TRANSFL
NHD-0216K1Z-FSA-GBW-L
LCD MOD CHAR 2X16 AMB TRANSFL
NHD-0216K1Z-FSB-FBW-L
LCD MOD CHAR 2X16 BLUE TRANSFL
NHD-0216K1Z-FSB-GBW-L
LCD MOD CHAR 2X16 BLUE TRANSFL
NHD-0216K1Z-FSO-FBW-L
LCD MOD CHAR 2X16 ORN TRANSFL
NHD-0216K1Z-FSO-GBW-L
LCD MOD CHAR 2X16 ORN TRANSFL
相关代理商/技术参数
NHD-0216HZ-FSW-GBW-3V3C
功能描述:LCD字符显示模块与配件 STN- GRAY Transfl 65.5 x 36.7 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FL-GBW
功能描述:LCD字符显示模块与配件 STN- GRAY Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FL-YBW
功能描述:LCD字符显示模块与配件 STN- Y/G Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FS
制造商:NEWHAVEN 制造商全称:NEWHAVEN 功能描述:Character Liquid Crystal Display Module
NHD-0216K1Z-FS(RGB)-FBW
功能描述:LCD字符显示模块与配件 FSTN (+) Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FS(RGB)-FBW-REV1
功能描述:LCD字符显示模块与配件 FSTN (+) Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FSA-FBW-L
功能描述:LCD字符显示模块与配件 FSTN (+) Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk
NHD-0216K1Z-FSA-GBW-L
功能描述:LCD字符显示模块与配件 STN- GRAY Transfl 80.0 x 36.0 RoHS:否 制造商:Lumex 显示模式:Transflective 字符计数 x 行:16 x 2 特点: 流体类型:STN 接口: 背景色: 工作温度范围:- 20 C to + 70 C 封装:Bulk